The application of Venetian plaster involves the plaster being heavily trowelled as it is finished. Wallboard primer or white matt emulsion mist coat. The wall surface should be painted with an approved Prior to the application of Venetian plaster, the substrate (wall) must be clean, smooth, sanded and stable. This layer is then left to dry for between 12 - 16 hours.Ī water-based wax is then applied with a sponge and buffed off, either using a clean mutton cloth or an electric buffer. ![]() The surface is then lightly sanded to remove any imperfections.Ī third coat is then applied using small irregular trowel strokes, and left until it is 60% - 70% dry.Ī fourth coat is then applied using the same small irregular trowel strokes but this time, as the material dries, it is polished (burnished) using a clean steel trowel to create a highly Below is a brief outline of the application process for our Marmorino Spatula finish:Ģ x layers of lime putty are applied ‘wet on wet’ to produce a smooth surface, which must be left to dry for between 8 - 16 hours. Application could require anywhereīetween 2 - 5 coats. With Venetian plaster, the application process will vary in length and complexity depending on which finish is being installed. There are several different types of backing plaster, each of which are more appropriate for certain substrates, but the most common types of backing plaster are Afterwards, the surface is skimmed as above. “float and set” finish whereby a backing plaster is applied first, to a depth of around 10-13mm, in order to cover the block work. In certain properties, for example more high end homes or refurbishments, stud walls are generally not used, but instead solid block work. ![]() This surface is then ready to be painted over. When a wall is skimmed, two coats of finishing/Multi finish plaster are applied to a depth of only 2-3mm. ![]() These stud walls are then usually either tape and joined, or skimmed. In most modern homes in the UK, there are usually stud walls (metal framework and plasterboard).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |